PP Systems CIRAS-2 - CFM Setup; Recovery Period (Seconds); If Batch Response, Dark Adapt for each Level

CFM Operation
CIRAS-2 Operator's Manual Version 2.04
- 104 -
CFM Setup
Click on Setup to set the timing and light sources for the adaptation type selected. The Calculation
Options dialog will be displayed allowing you to set the timing and light control for the required
fluorescence calculation.
Dark Adaptation
Parameter
Setup Options
Fv/Fm
Duration (seconds)
Intensity (µmol m
-2
s
-1
)
Pulse Width (seconds)
Recovery Time (seconds)
Fo
Duration (seconds):
Far Red Adaptation
Parameter
Setup Options
Fo‟
Duration (seconds)
Recovery Period (seconds)
Time allowed for leaf to recover – dependent on Adaptation Type.
If Batch Response, Dark Adapt for each level
If performing a “Batch Response”, you have the option to check this off if you want to dark adapt the leaf
sample for each batch response level (if Dark Adaptation is selected) or light adapt the leaf sample for
each level (if Far Red Adaptation). This is not available if „No Adaptation‟ is selected.