Recalculate Data
CIRAS-2 Operator's Manual Version 2.04
- 90 -
Export all environmental parameters (PAR, TC, LAR, TL, V,).
Please note:, LTC is not included with this selection.
Export user selected fields. If selected, tick off the fields that you
would like to export.
Important: To recover VPD and RH data recorded during a live session you must first deselect „All Fields‟
and select „Calculate VPD and Cuvette %RH‟. Then check „All Fields‟ again.
After selecting the appropriate fields to be exported, click on Export . You will be prompted to save the file
(.tab extension) in the format selected under Options (above). After naming the file, click Save.
Exportable file types are CIRAS-2 Recorded Data (.dat), CIRAS-2 Internal Records (.dmp) and Closed
System Measurements (.csc). Recalculation Data (.mod) is treated as CIRAS-2 Recorded Data.
Options
Refer to the section above on page 82.
To Next Page
Loading...
