Getting Started –
CIRAS-2 Operator's Manual Version 2.04
- 17 -
Open the „Accessory‟ drop down list containing the standard cuvettes and chambers that may be used
with CIRAS-2. From this list select „PLC6 (U) 18 mm diameter insert‟ – this is the most common leaf
cuvette used with the CIRAS-2 system. By making this selection, various other options will automatically
be set to default settings that are standardized for the PLC6 (U) cuvette. In the „Light Type‟ list select
„LED‟. If using a different insert with the PLC6(U) or a different cuvette, select the appropriate option from
the list. Click OK. The Settings dialog and all of its options will be described in detail later.
Click ? at any time for On-line help
While working with CIRAS-2 from your PC or notebook you have access to compiled Windows Help Files
through the ? buttons associated with most CIRAS-2 screens and dialog boxes. Help Files are context-
sensitive, providing detailed information about the screen or user option you are currently viewing.
PP Systems is continuously updating our print and on-line documentation to reflect hardware and software
changes. Due to this some images and information contained in compiled Windows Help Files are out of
date and may not reflect exactly the current version 1.07 RCS software. Always consult the print version
of the Operator‟s Manual first before using the on-line resource. Please note: Help Files are not
available with the Windows CE version of RCS used with the UI.
To Next Page
Loading...
Need help?
General
