System Setup and Operation
CIRAS-2 Operator's Manual Version 2.04
- 43 -
Delete Entry
This removes the currently selected PRM File and its individual settings.
Accessory
Open the „Accessory‟ drop down list containing the standard cuvettes and chambers that may be used
with CIRAS-2. From this list select, for example, the standard automatic leaf cuvette „PLC6 (U) 18 mm
diameter insert‟. By making this selection, various other options will automatically be set to defaults for
this Accessory.
The table below lists several current and older-style cuvettes and chambers supported by CIRAS-2.
CIRAS-2 as stand-alone analyzer (no cuvette)
Auto PLC (Temp. and Light)
PLC6 (U) 18 mm circular (2.5 cm
2
head plate)
PLC6 (U) 25 x 7 mm narrow (1.75 cm
2
head plate)
PLC6 (U) 25 x 18 mm wide (4.5 cm
2
head plate)
PLC6 (A) for Arabidopsis (1.29 cm
2
head plate)
PLC5 (B) broadleaf (2.5 cm
2
head plate)
PLC5 (N) narrow leaf (10 cm
2
head plate)
PLC5 (C) conifer (10 cm
2
head plate)
PLC5 (P) pod (10 cm
2
head plate)
Other
To Next Page
Loading...
