PP Systems CIRAS-2 User Manual

CIRAS RCS Menu Bar
CIRAS-2 Operator's Manual Version 2.04
- 35 -
Stored Diff Bal
This function allows the user to preset and store differential balance values which can be extremely helpful
when performing response curves measurements. Refer to Stored Diff Bal on page 78.
Calibration
Used to perform a full CO
2
or H
2
O calibration on CIRAS-2. Refer to Calibration on page 143 for more
details.
Calibration Check
Used to verify the current CIRAS-2 CO
2
and H
2
O calibration settings. Refer to Calibration Check on page
145 for details.
Calibration Reset
Resets the CIRAS-2 calibration to the Factory Default. Refer to Calibration Reset on page 147 for details.
CO2 Midpoint
Refer to CO2 Midpoint on page 147 for further details.
Please note that CIRAS-2 Firmware (EPROM) Version 1.67 or greater is required for this function.
If unsure of firmware version, see View – Quick Info in the CIRAS menu bar.

PP Systems CIRAS-2 Specifications

General

Brand	PP Systems
Model	CIRAS-2
Category	Measuring Instruments
Language	English