PP Systems CIRAS-2 User Manual

System Setup and Operation
CIRAS-2 Operator's Manual Version 2.04
- 50 -
Cuvette Environment
Click Cuvette Environment to enter baseline settings and values of environmental control variables that
define conditions inside the leaf chamber. These settings will be in effect each time you launch the RCS
program under the current Set and Parameters files, and whenever you exit the Recording Mode, where
you may be using different values. Control values associated with Cuvette Environment may be
changed at any time except during Response Curve recording. CIRAS-2 control variables available with
the PLC6(U) automatic cuvette and LED light unit are: CO
2
, H
2
0, PAR, temperature and flow rate.
Additional options exist to control CO
2
, H
2
0 and temperature in ways that allow greater flexibility and
convenience during measurements.

PP Systems CIRAS-2 Specifications

General

Brand	PP Systems
Model	CIRAS-2
Category	Measuring Instruments
Language	English