Measuring Soil Respiration with CIRAS-2
CIRAS-2 Operator's Manual Version 2.04
- 132 -
up) according to the options in Select File Mode. There is always a final confirmation to verify that the
selected file is correct.
If you need to change the Plot Number or wish to add a comment between measurements, click on the T
button in the upper left hand corner of the display. At any time during the course of a measurement, click
the Quit button to end the measurement. To begin a new set of records in a new data file, use the New
Measurement option in the Closed System Setup dialog.
To Next Page
Loading...
