Diagnostics
CIRAS-2 Operator's Manual Version 2.04
- 141 -
tests are performed where applicable. The user is required to perform certain functions during the
process, such as connecting an external Zero Column (supplied) during the 'Analyser Test' and
connecting a Leaf Cuvette during the 'Leaf Cuvette Tests'. Requires i) external CIRAS-2 Power Supply, ii)
External Zero Column, iii) fresh chemicals, iv) external power supply to Leaf Cuvette (if needed, e.g. for
the PLC5 cuvette or tungsten halogen light source. Approximately 3/4 of an hour required to perform the
tests.
To begin click Start Extended Diagnostics in the first dialog and make the following selections:
To Next Page
Loading...
