OPC UA Server PLX32-EIP-MBTCP-UA ♦ Multi-Protocol Gateway
User Manual
Page 150 of 156 ProSoft Technology, Inc.
March 8, 2018
7.12.5 Backup of PSW-UACM configuration database
The PSW-UACM configuration database is located in the
C:\ProgramData\Prosoft Technology\OPC UA Server Configuration Manager
folder. In order to create a backup copy, close PSW-UACM, and copy the folder
content into a backup destination.
7.12.6 Moving the PSW-UACM Installation to a Different Machine
A single installation of the PSW-UACM must be used to configure all PLX32-EIP-
MBTCP-UA devices. This setup will not work if another copy of the PSW-UACM
is installed on another PC. If PSW-UACM must be migrated to another PC, then:
Create a backup of the PSW-UACM database as described in Section
7.12.5.
Install PSW-UACM on another PC
Restore backup files on the PC into the C:\ProgramData\Prosoft
Technology\OPC UA Server Configuration Manager folder
(PSW-UACM must be closed during restore).
To Next Page
Loading...