PLX32-EIP-MBTCP-UA ♦ Multi-Protocol Gateway Diagnostics and Troubleshooting
User Manual
ProSoft Technology, Inc. Page 31 of 156
March 8, 2018
3 Diagnostics and Troubleshooting
You can troubleshoot the gateway using several methods:
Monitor the LED indicators on the gateway.
Use the Diagnostics functions in ProSoft Configuration Builder (PCB).
Examine the data in the status data area (upper memory) of the gateway
internal memory.
3.1 LED Indicators
The first and quickest is to scan the LEDs on the gateway to determine the
existence and possible cause of a problem. The LEDs provide valuable
information such as:
The state of each port
System configuration errors
Application errors
Fault indications
To Next Page
Loading...