136
supervise and take control of the
function.
• At the entrance of highway or trunk road,
due to the change of road, the ICC
system cannot provide direction assist
and will be degraded to cruise control.
• The ICC system cannot work under
complex road conditions, e. g.: severely
congested road, entering or exit tunnel,
complicated traffic changes, crossing,
intersections, ramps, lost lane lines, etc.
The driver needs to supervise and take
control of the function. The ICC system
only provides comfort experience when
the road conditions are suitable, and the
driver should take full responsibility for
safe driving.
Function Selection
Click the following on the multimedia display
in sequence:
Vehicle Settings → Auxiliary Driving →
Intelligent Driver Assistance, and select the
Intelligent Cruise Control (ICC) in this
interface.
After selecting the ICC function on the
multimedia display, ICC can be turned on or
off by using the Cruise Control buttons on
the left side of steering wheel (via steering
wheel control button). The horizontal and
longitudinal control indicators for cruise
control system will illuminate in grey.
Steering Wheel Control Button
Cruise control buttons for ICC system are
on the left side of the steering wheel.
1. OK button
Press this button briefly to enable (turn
on) the ICC system.
2. ICC Speed Increase and Resume
button
Driving Assist
To Next Page
Loading...