138
accelerator pedal to make ICC system
control the vehicle to start moving.
• ICC will control the vehicle according to
the set cruise speed.
ICC Activation (vehicle is in motion)
When the vehicle is in motion and the
Intelligent Cruise Control (ICC) system has
been selected in the multimedia display,
activate the ICC and set the vehicle speed
as follows:
• Press OK button to enable the ICC. The
longitudinal and lateral control indicator
on the meter instrument display will turn
on in grey, indicating that ICC is in
standby mode.
• Press the ICC speed decrease button to
activate ICC and set cruise speed. The
cruise system longitudinal and lateral
control indicator on the meter instrument
display will turn to green.
If the vehicle speed is below 30 km/h, the
set cruise speed is 30 km/h. If the vehicle
speed is between 30 km/h and 150 km/h,
the current vehicle speed will be the set
cruise speed.
• ICC will control the vehicle according to
the set cruise speed.
ICC Speed Setting
Press the ICC speed increase and resume
button or ICC speed decrease button to set
the desired cruise speed.
ICC Reminder and Indicator
During cruising, as the relative vehicle
speed varies, the meter instrument will
display different distance states from the
preceding vehicle to your own vehicle to
remind the driver.
1. Set Cruise Speed indicator
If ACC is not activated (in standby
mode), the set cruise speed indicator is
grey.
If ACC is activated, the set cruise speed
indicator turns to green.
2. Cruise System Lateral Control indicator
Grey when ICC is not activated (system
in standby mode).
Green when ICC performs cruise
control and lane keep assist at the same
time.
When ICC only perform cruise control
(lateral control LKA not function), this
indicator turns black.
3. Preceding Vehicle Image
The preceding vehicle image is grey
when ICC is not activated and will turn
on in blue when the ICC is activated and
following the front vehicle as target.
If the distance between the vehicle and
the preceding vehicle is too close, the
preceding vehicle image is yellow.
If the distance between the two vehicles
is too close and the driver’s active
Driving Assist
To Next Page
Loading...