42
Type II
Click the following on the multimedia display
in sequence: Vehicle Settings → Vehicle
Control → Doors and Windows, and then
enable the close to unlock function in the
interface. After close to unlock function is
enabled; When the vehicle is locked, just
bring the valid intelligent key into the
keyless entry operating range. All doors will
automatically unlock and all door handles
will pop out. Pull the pop out part of the door
handle to open the door and the turn signals
will blink.
Setting the Keyless Entry
Function
Click the following on the multimedia display
in sequence: Vehicle Settings → Vehicle
Control→ Doors and Windows → Touch The
Door Handle To Unlock, and then select All
Doors or Driver’s Side Door in the interface.
• All doors: After the function of Touch the
door handle to unlock is set to The whole
car, when you touch the unlocking sensor
area on the driver door handle, all doors
will unlock automatically.
• Driver’s door only: After the function of
Touch the door handle to unlock is set to
Driver’s side door, when you touch the
unlocking sensor area on the driver door
handle, only the driver doors will unlock
automatically; Other doors will remain
locked.
Keyless Locking
Type I
Locking sensor area
After closing all doors and tailgate, touch the
locking sensor area on the driver door
handle to lock all doors. After successful
locking, the turn signal will flash, the locking
prompt sound will sound (locking prompt
Enter and Exit
To Next Page
Loading...