43
sound function on) and the interior lamp will
fade out.
Type II
Click the following on the multimedia display
in sequence: Vehicle Settings → Vehicle
Control → Doors and Windows, and then
enable the Stay-away Locking function in
the interface. When Stay-away Locking
function is enabled, the vehicle is in
unlocked state and all doors are closed, if
the driver walk away from the vehicle with a
valid intelligent key, the vehicle will be
locked, the turn signal will flash and the
locking prompt sound will sound (if locking
prompt sound function on).
Keyless locking fails if:
• The vehicle is not powered off.
• Any door is not closed.
The following conditions may affect the
Stay-away Locking function:
• The intelligent key only works within the
operating range of keyless entry system.
Enter and Exit
Please note that its operating range is
sometimes affected by physical and
geographic factors. For safety concern, it is
necessary to check whether the operation
succeeds when locking the vehicle.
• The intelligent key may be interfered
when the vehicle is in a charging station,
a large parking lot, a substation, and
other places with signal interference, or
when the intelligent key is put together
with the equipment that can cause signal
interference (such as mobile phones,
Bluetooth devices, computers and
inverters). Consequently, abnormal key
functions, such as unlocking or locking
abnormalities will be observed
occasionally. If so, wait for 1s before
placing hand on the door handle
unlocking or locking sensor area for
unlocking or locking.
• When the intelligent key is in an area
close to the vehicle for a certain period of
time, in order to save the power
consumption of the vehicle, the Stay-
away Locking function may turn off
automatically. Unlock the vehicle or
open/close the door to reactivate the
Stay-away Locking function.
• After turning on the Close to unlock or
Stay-away Locking function, leave
the vehicle only after confirming that
the vehicle has been successfully locked.
•
To Next Page
Loading...