EasyManuals Logo

PRÜFTECHNIK VIBSCANNER 2 User Manual

PRÜFTECHNIK VIBSCANNER 2
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
o
In a loaded industrial environment, the measuring device may have its function im-
paired due to contamination or moisture. Make sure that the protective caps are
attached properly to the measuring device.
o
Damaged device technology may reduce the quality of measurement results and in
the worst case falsify the quality. Handle the device technology carefully and pro-
tect it from strong vibrations. Use the transport case to transport and store the
device technology.
o
Repairs on the measuring device and the measuring equipment may be performed
by authorized specialist personnel only.
o
The device technology is maintenance-free. Opening the measuring device or the
sensor system by the user is prohibited.
o
Modifications and changes to the device technology are prohibited.
o
Improper operation may damage the touch display. Do not use any scratching or
sharp objects for operation. In addition to using your finger to operate the device,
it is also appropriate to use standard touch pens or touchscreen gloves. Do not ap-
ply too much pressure to the touch display. Light tapping is usually sufficient.
Observe the following safety instructions when handling the rechargeable battery and
the power adapter:
o
Only charge the battery by using the power adapter supplied. Observe the ac-
companying operating manual.
o
Do not discharge the battery too deeply (< 15%).
o
Discharge the battery so that the remaining battery power is less than 60% if the
device is to be sent by air freight.
o
Do not send the device by airfreight if the battery is defective.
Risk of injuries
Improper use of the measuring device or defective equipment may pose a hazard to the
user.
o
You may only operate the device technology with proper training in its operation.
o
Only use the measuring device outside potentially explosive areas.
o
Immediately shut down the measuring device and the sensors if malfunctions in-
dicate that they are no longer working properly or if they exhibit visible damage.
o
Faults, such as defective plugs or loose connections, must be corrected im-
mediately. Damaged components must be replaced immediately.
VIBSCANNER 2 11
1 - Introduction

Table of Contents

Other manuals for PRÜFTECHNIK VIBSCANNER 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PRÜFTECHNIK VIBSCANNER 2 and is the answer not in the manual?

PRÜFTECHNIK VIBSCANNER 2 Specifications

General IconGeneral
BrandPRÜFTECHNIK
ModelVIBSCANNER 2
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals