PRÜFTECHNIK VIBSCANNER 2 - Charge Socket; Data Interface (Micro USB)

2.4.2 Charge socket
The power adapter is connected to the measuring device using the charge socket. Using
the power adapter, you can either charge the rechargeable battery or operate the meas-
uring device with main power.
ATTENTION!
Measuring device or rechargeable battery can be damaged. Only use the en-
closed power adapter for operating the measuring device and/or charging the re-
chargeable battery. Observe the enclosed safety information regarding the
power adapter.
Connecting the power adapter to the charge
socket
Connecting the power adapter to a power socket
Note
The power adapter features international plug adapters for all common power
sockets. Replace them as needed. Observe the enclosed safety operating in-
structions for the power adapter.
2.4.3 Data interface (Micro USB)
The supplied micro USB cable is used for data exchange with a PC. VIBSCANNER 2 switches
automatically into data communication mode, as soon as the USB cable is connected.
VIBSCANNER 2 is connected with a PC via USB in-
terface.
22 Edition: 11.2017
2 - Description