EasyManuals Logo

PRÜFTECHNIK VIBSCANNER 2 User Manual

PRÜFTECHNIK VIBSCANNER 2
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
1.2 Safety
VIBSCANNER 2 is designed and built following a careful selection of the harmonized norms
to be complied with as well as other technical specifications. The measuring device there-
fore corresponds to state of the art, and ensures the highest degree of safety.
Nevertheless, there are still risks relating to its operation which are to be avoided. Ob-
serve the general safety instructions in this section as well as the warnings embedded in
the overall instructions. Safety instructions explain how you should act in order to protect
yourself, others and objects from harm. The user of the measuring device shall be re-
sponsible for damage and injuries caused by nonobservance of these instructions.
1.2.1 General safety
In addition to the information in these operating instructions, observe the general, legal
and other binding regulations for accident prevention and environmental protection.
These may be, for example:
o
Handling hazardous substances
o
Wearing the required and prescribed personal protective clothing and protective
equipment
o
Observe and follow all national and regional occupational health and safety reg-
ulations
o
Observe and follow all internal occupational, operational and safety provisions
Residual hazards and protective measures
VIBSCANNER 2 is safe if used as intended. The following damage may occur if used im-
properly:
o
Personal damage
o
Damage to the device technology or the monitored machine
Risk of damage to the device
Incorrect use of the measuring device and its accessories may lead to damage and, in the
worst case, to the destruction of the device technology.
o
Use original spare parts and original accessories only.
o
During operation, charging and storage, protect the measuring device from un-
usual external heat (intense sunlight, storage in heated car, direct vicinity to open
flame or heating devices). The temperature ranges specified in the technical data
must be observed.
o
The measuring device meets protection class 65 and is not waterproof. Do not sub-
merge the measuring device in liquids.
10 Edition: 11.2017
1 - Introduction

Table of Contents

Other manuals for PRÜFTECHNIK VIBSCANNER 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PRÜFTECHNIK VIBSCANNER 2 and is the answer not in the manual?

PRÜFTECHNIK VIBSCANNER 2 Specifications

General IconGeneral
BrandPRÜFTECHNIK
ModelVIBSCANNER 2
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals