o
[Go to next machine train after...]: The route sequence can be accelerated using
this function. After completion of all measurements on a machine train, the pro-
gram calls the next machine train automatically. Select the respective waiting time
in the corresponding sub-menu. To deactivate this function, select the [No] op-
tion.
o
[Stay on measurement location on...]: If a threshold violation occurs, switching to
the next measurement location can be interrupted. In the sub-menu, select the
threshold, when the program should stop at the machine train. To deactivate this
function, select the [No] option.
Detail route guidances
Here you defined, how you should be guided to the first measurement location, when the
route is started.
o
Activated: You are guided through the entire navigation path of the route to the re-
spective measurement location. Every step must be confirmed.
o
Deactivated: The respective measurement location is called directly.
Machine speed finder
Machine speed finder is a function that determines the speed of the machine based on
the measured vibration signal. The suggested speed value can be verified afterwards us-
ing a stroboscopic measurement.
Here you define, whether the speed should be determined at all measurement locations
or at the reference measurement location only.
o
Activated: The suggested speed value must be confirmed and possibly verified
after every measurement.
o
Deactivated: The speed is determined at the reference measurement location only
and transferred to all measurement locations on the machine train via the stored
kinematic model.
Note
Machine speed finder is only used if the following prerequisites are met:
Machine train contains a reference RPM measurement.
Several machine trains are configured as production line
Practical tip:
Activate machine speed finder for all measurement locations on the ma-
chine train, if the speed briefly fluctuates during data acquisition on the
machine train.
46 Edition: 11.2017
3 - Operation
To Next Page
Loading...
