Parameter VIBSCANNER 2
Charge time, typical 5.0 h (0 ... 100 % @ 25 °C / 77 °F)
3.5 h (0 ... 80 % @ 25 °C / 77 °F)
Charging tem-
perature
10 °C ... 40 °C
[50 °F ... 104 °F]
Operating time, typ-
ical
12 h (continuous operation, rechargeable battery 100 %)
6 h (continuous operation, rechargeable battery 50 %)
Power adapter 100-240 V~, 50-60 Hz (input)
12 V 3 A (output)
Energy saving mode Yes
Computer
Processor ARM A9 - Quadcore 1 GHz
Operating elements Touchscreen, ON/OFF key, Enter key
Memory microSD card, 32 GB for measurement data, permanently in-
stalled
2 GB RAM
USB 1 x USB 2.0, device interface
RFID RFID reader module for PRÜFTECHNIK transponder ALI 50.628-
25
Complies with ISO 14443a and ISO 15693
Reading distance: 2...3 cm (13/16” ... 1 3/16”)
WiFi IEEE 802.11a/b/g/n/ac
Throughput: < 200 Mbps
Security: WPA2
Stroboscope Frequency range: 0.1 – 1000 Hz
Resolution: 0.06 1/min.
LEDs: Risk group 1 per IEC 62471
LED 1x RGB LED (display for battery status and charging process)
Environment / mechanical system
Connections Socket for power adapter
Micro USB for data cable
Plug-in connector (8-pole) for signal cable
To Next Page
Loading...
