Pulsar Ultra 4 User Manual

ULTRA 4 INSTRUCTION MANUAL
122
OPTION
DESCRIPTION
When Ultra Wizard = 3 Flow
8 = Flow
Alarm is based on the Flow in the application and two
setpoints must be entered (P2n3 & P2n4). Setpoints are
entered in Flow units.
9 = Average Flow
Alarm is based on the Average Flow in the application and
two setpoints must be entered (P2n3 & P2n4). Setpoints are
entered in Flow units.
Important Notice
The Loss of Echo, and Loss of Clock will also be shown on the display as
“Lost Echo”, and “Lost Clock” respectively.

Pulsar Ultra 4 Specifications

General

Brand	Pulsar
Model	Ultra 4
Category	Measuring Instruments
Language	English