Pulsar Ultra 4 - Page 134

ULTRA 4 INSTRUCTION MANUAL
134
Logged data points
A full list of the information logged onto the SD card for the different system
types is found below:
When System Type = Pump:
0 = None
1 = Status
2 = Level
3 = Distance
4 = Space
5 = mA Out
6 = Strength
7 = Confidence
8 = Temperature
9 = Relay Status
When System Type = Level/Volume
As above plus:
10 = Volume
When System Type = Flow
Same as System = pump plus:
10 = Flow
11 = Average Flow
12 = Head
13 = Tot D
14 = Tot R
15 = Tot S