ULTRA 4 INSTRUCTION MANUAL
50
The Ultra 4 can measure from zero to 16m from the transducer to the
surface being monitored, dependent on the transducer used. Details of
level, space, distance, head, or flow can be show on the display along with a
totaliser if desired. The four user-definable relays with individual setpoints
can be programmed to activate devices such as pumps, samplers, remote
totalisers, or other control equipment.
The 4-20 mA output is fully programmable to provide an output relative to
level, space, distance, head, average flow, or flow.
To Next Page
Loading...
