Руководство пользователя
5. BIOS parameter setting description 113
www.qtech.ru
❖ Disable :
❖ Default value: Disable
Correctable Error Threshold : The error threshold can be corrected, the effective value
is 0x01-0x7fff, and the default value is 0x7fff.
SDDC
SDDC switch setting, note: AEP DIMM is not supported when it exists, the menu
options are:
❖ Enable : turn on
❖ Disable :
❖ Default value: Disable
ADDDC Sparing
ADDDC hot standby switch setting, the menu options are:
❖ Enable : turn on
❖ Disable :
❖ Default value: Disable
Set NGN Die Sparing
Set NGN Die hot backup switch settings, the menu options are:
❖ Enable : turn on
❖ Disable : Off
❖ Default value: Enable
Patrol Scrub
Patrol Scrub switch settings, the menu options are:
❖ Enable : turn on
❖ Disable : Off
❖ Default value: Enable
Patrol Scrub Interval : Patrol Scrub interval time setting, the unit is hour, the range is 1-
24, the default value is 24.
Patrol Scrub Address Mode
Patrol Scrub address mode setting, the menu options are:
❖ Reverse address
❖ System Physical Address
❖ Default value: System Physical Address
To Next Page
Loading...