Руководство пользователя
5. BIOS parameter setting description 85
www.qtech.ru
5.2.11 CSM Configuration
Figure 5-10
CSM Support
Figure 5- 10
To enable or disable the compatible support module, the menu options are:
❖ Disabled:shut down
❖ Enabled: Open
❖ Default value: Enabled
GateA20 Active
A20 address line control mode setting, the menu options are:
❖ Upon Request:If needed
❖ Always:always
❖ Default value: Upon Request
INT19 Trap Response
Interrupt and capture signal response settings, the menu options are:
❖ Immediate:Respond immediately
❖ Postponed:Delayed response
To Next Page
Loading...