Руководство пользователя
6. RAID Setting Instructions 191
www.qtech.ru
Figure 6- 89
6. Enter the interface shown in Figure 6-90 to complete the operation of erasing logical
disk data.
Figure 6-90 Completed erasing logical disk data
Figure 6-90
6.2.6 Migrate RAID level:
This function is used to modify the RAID level to meet the configuration requirements
without affecting the current data integrity.
1. As shown in Figure 6-91, select Virtual Drive Management on the RAID card
configuration interface, and press Enter.
Figure 6-91 RAID card configuration interface
To Next Page
Loading...
General