Руководство пользователя
4. System cabinet Installation 69
www.qtech.ru
4.3 Install server to cabinet
Step 4. Align the cabinet with the inner rail to the outer rail for installation.
Note: When you push the chassis forward, you hear a pop. If you can't push it, you
need to pull the inner rail buckle down to continue pushing the chassis gently.
Figure 4-4
Step 5. When the chassis is pushed forward and cannot slide, the screws are installed
firmly.
Note: When the equipment is maintained, it is necessary to loosen the panel screws
and gently pull the chassis. Do not push and pull the chassis at will, so as not to
damage the equipment.
To Next Page
Loading...
General