QTech QSRV-26 Series

Руководство пользователя
6. RAID Setting Instructions 210
www.qtech.ru
❖ Locate->Start: Start the disk positioning operation.
❖ Locate->Stop: Stop positioning the disk operation.
6.7 Initialize the logical disk:
This function is used to initialize the internal data space of the disk so that it can be
recognized and used by the operating system.
1. As shown in Figure 6-123, select the disk to be initialized on the VD Mgmt interface
and press F2.
Figure 6-123 Select the disk to be initialized
Figure 6-64
2. Enter the interface shown in Figure 6-124 and select Initialization->Start FGI.
Figure 6-124 Select Initialization-〉Start FGI
Figure 6-65