Руководство пользователя
5. BIOS parameter setting description 94
www.qtech.ru
5.2.17 PCH sSATA Configuration
Figure 5-17
sSATA Controller
sSATA controller switch, control to turn on and off the sSATA controller, the menu
options are:
❖ Disabled: Turn off the sSATA controller.
❖ Enabled: Turn on the sSATA controller.
❖ Default value: Enabled
Configure sSATA as
sSATA mode selection, the menu options are:
❖ AHCI: Select sSATA mode as AHCI mode.
❖ RAID: Select sSATA mode as RAID mode.
❖ Default value: AHCI
SATA test mode
SATA test mode switch, the menu options are:
❖ Disable: Turn off.
❖ Enable: Turn on.
❖ Default value: Disable
sSATA Port X
Display the device information on sSATA Port 0~7, and display Not Installed when the
device is not connected.
To Next Page
Loading...
General