Руководство пользователя
6. RAID Setting Instructions 213
www.qtech.ru
Figure 6-128 Confirm erasure
Figure 6- 69
To avoid disk failure, please do not perform other operations during the erasing of
physical disk data.
2. Erase logical disk data
2.1. As shown in Figure 6-129, select the logical disk to be erased on the VD Mgmt
interface and press F2.
Figure 6-129 Select the logical disk to be erased.
Figure 6-70
2.2.
Enter the interface shown in Figure 6-130, select the erase mode (the default
mode is recommended: Simple), and press Enter.
Figure 6-130 Select erasing mode
To Next Page
Loading...
General