3. If the system asks for a PIN code, enter the code and press [OK].
The Credit screen is displayed.
By default, the system displays the value of the previous crediting amount.
4.
Enter the amount to add using the keypad (Use on the keypad to clear
digits).
The amount must be in the range of Minimum reset amount and
Maximum reset amount.
5. Press [OK] to start the connection to the postal server.
If the crediting process is successful, the system displays a message.
If crediting fails, the system displays a failure message together with the value
you are allowed to add, depending on your postal account balance.
In the event of a communication error, the amount previously
entered cannot be changed.
138
| Page 138 | Jan-15-2024 09:55 |
5
Money-Related Operations
To Next Page
Loading...
Need help?
General
