1. As Supervisor (see Log in as Supervisor on page 277):
From the main menu and select the path: Account Management Account
Mode Selection
The Account Mode Selection screen is displayed with the current 'Account Mode'
shown.
2. Select 'No account'.
3. Press [OK] to confirm.
4. If required, enter the PIN code and press [OK].
The Mailing System then confirms that the 'Account Mode' has been changed.
To return to the home screen, you have to press to put the
machine into sleep mode. Then continue to press to turn on
the machine.
6
Accounts and Access Control
157
| Page 157 | Jan-15-2024 09:55 |
To Next Page
Loading...
