3. Press [Select] to validate.
This is a user setting that only lasts as long as you are logged
in.
To change the user language by default:
1. As Supervisor (see Log in as Supervisor on page 277):
From the main menu, select the path: Default User Settings Default User
Preferences Language
2. Select the default language.
3. Press [Select] to validate.
To return to the home screen, you have to press to put the
machine into sleep mode. Then continue to press to turn on
the machine.
11
Configuring your Mailing System
317
| Page 317 | Jan-15-2024 09:55 |
To Next Page
Loading...
