To set the Postal/Online Services connection (use LAN):
1. As Supervisor (see Log in as Supervisor on page 277):
From the main menu, select the path: Communication Settings Type of
Connection
If you did not have the LAN plugged into the system, you will
get a warning message.
Please follow the message instruction: check your
communication cable or device and press OK.
2. To use the LAN, select Ethernet and press [OK].
3. For LAN settings, see How to Set LAN (High-speed Internet) Parameters on page
332.
See also
- To physically connect the LAN to the base, see System Connections on page
46.
330
| Page 330 | Jan-15-2024 09:55 |
11
Configuring your Mailing System
To Next Page
Loading...
Need help?
General
