The EAP method is EAP – PEAP:
1. In Wireless Network Connection screen, the Encryption type is 802.11i – EAP and
the EAP method is EAP – PEAP (see How to Connect a Wireless Network (Wireless
LAN) on page 342).
2. Press Install certificates.
3. Press Validate. All data are saved and previous screen is displayed.
4. Press Connect to connect to the network.
If the Authentication certificates are not available or have
expired, this error message is displayed:
“Certificates could not be found or have expired. Please check
your details or contact your administrator.”
11
Configuring your Mailing System
349
| Page 349 | Jan-15-2024 09:55 |
To Next Page
Loading...
Need help?
General
