Data Management
R&S
®
FPC
51User Manual 1178.4130.02 ─ 07
You can preview all available datasets in the selected folder with the "Prev" and
"Next" menu items.
When you have found a dataset that you would like to restore, you can restore it
directly with the "Recall" menu item.
Taking screenshots
You can take and store a screenshot of the current screen anytime with the camera
key.
If available, the R&S FPC stores the screenshot on an external storage device (USB
memory stick). If it can find no external memory, the R&S FPC stores the screenshot
on the internal memory.
By default, the screenshot is a .png file and has the filename Measurementxxx.png,
with xxx being a consecutive number. You can change the file type and default file-
name.
1. Press the "Setup" key to open the setup menu.
2. Select the "User Preference" to open the user preference menu.
3. Select the "Default Filename" menu item to change the default filename.
Enter any filename you like with the alphanumeric keys, for example "Screenshot".
Every screenshot that you take from now on will have that name.
4. Select the "Filename Counter Starts At" menu item to change the numbering of
screenshots.
Enter any number you like with the alphanumeric keypad, for example "100". The
next screenshot you take will begin with the number 100. All subsequent screen-
shot will have a number starting from 100.
5. Select the "Capture Screen Format" menu item to select the file type for the
screenshot. You can save screenshots as a .png or .jpg.
Previewing screenshots
You can have a look at screenshots you took on the R&S FPC.
1. Press the "Save Recall" key top open the file menu.
2. Select the "Recall Screenshot" menu item to open the file manager.
3. Navigate to the screenshot you would like to view.
4. Confirm your selection with the "Preview" menu item.
To Next Page
Loading...
Need help?
General
