Raymarine c97 - Editing Information in Dialogs

Usingcontroldialogs
Controldialogsenableyoutocontrolexternallyconnected
equipment,suchasanautopilotunit.
Thefollowingdiagramshowsthemainfeaturesofatypicalcontrol
dialog:
1
3
D12 279 -1
2
ScreenitemDescription
1
Status—providesstatusinformationfortheconnected
equipment.Forexample,thePilotControldialogdisplays
thelockedheadingandcurrentnavigationmodefora
connectedautopilotunit.
2
Controlicons—providedirectcontroloftheconnected
equipment.Forexample,thePilotControldialogStandby,
AutoandTrackiconsenableyoutoinstructaconnected
autopilotunittoperformspecicfunctions.
3
Dismiss—Closesthecontroldialog.
6.15Editinginformationindialogs
Withthedialogdisplayed:
1.Selecttheeldyouwanttoedit.
Theon-screenkeyboardisdisplayed:
2.Usetheon-screenkeyboardtomakethechanges.
3.Usetheon-screenkeyboard’sSAVEkeytokeepanychanges.
Enteringspecialoraccentedcharacters
Withtheon-screenkeyboarddisplayed:
1.Selecttheon-screenkeyboard’sàèòkey.
2.Selectthecharacteryouwanttoaccent.
Theavailableaccentedcharactersaredisplayedabovethetext
entryeld.
3.Forcharactersthathavemultipleavailableaccents,usethe
characterkeytotogglebetweenthem.
4.Selecttheàèòkeytoenterthecharacter.
70e7/e7D/e95/e97/e125/e127/c95/c97/c125/c127