Raymarine c97 - Page 85

Waypointfeatures
Therearearangeoffeaturesforplacing,navigatingandmanaging
waypoints.
Waypointfeaturesareaccessedfrom:
•thewaypointcontextmenu—bypositioningthecursoroveran
existingwaypointonthescreen.
•anyapplication—bypressingtheWPTbutton.Thisdisplays
theWaypointsmenu.
•thechartapplication—bygoingtothefollowingmenu:Menu
>MyData.
•thehomescreen—bygoingtothefollowingmenu:MyData.
Note:PressingtheWPTbuttonfromthehomescreenwillopen
thewaypointlist.
Waypointplacement
Placingawaypointusingtouch
ThisonlyappliestoHybridTouchdisplays.
D117 63-2
Fromthechart,radarorshnderapplication:
1.Selectandholdtherequiredlocationonscreen.
Thecontextmenuisdisplayed.
2.SelectPlaceWaypoint.
Placingawaypointatthecursorposition
Fromthechart,radarorshnderapplication:
1.Usingthejoystickmovethecursortotheareaofthescreen
whereyouwantthewaypointtobeplaced.
2.PresstheWPTbutton.
Thewaypointmenuisdisplayed.
3.SelectPlaceWaypointatCursor.
Thewaypointisplacedatthelocationandaconrmationpopup
messageisdisplayed.
4.SelectOktoconrmwaypointplacement,orEdittoeditthe
waypointdetails.
Placingawaypointatyourvessel’sposition
Inadditiontopositionalinformation,awaypointplacedatthevessel
positionwillcapturetemperatureandsoundeddepthinformation(if
youhavetheappropriatesensorsconnectedtoyoursystem).
Fromthechart,radarorshnderapplication:
1.PresstheWPTbutton.
Thewaypointmenuisdisplayed.
2.PresstheWPTbuttonagain.
Aconrmationpopupmessageisdisplayed.
3.SelectOktoplacethewaypoint,orEdittoeditthewaypoint
details.
Note:Alternativelywiththewaypointmenudisplayedyoucan
selectPlaceWaypointAtVessel.
Placingawaypointataknownposition
Youcanplaceawaypointataspeciedlocationusinglatitudeand
longitudecoordinates:
1.PresstheWPTbutton.
2.SelectPlaceWaypointAtLat/Lon.
3.Selectthepositioneld.
4.EntertheLatitude/Longitudeposition.
5.SelectSAVE.
6.Youcanalsoaddanameforthewaypointandaddtoagroup
byselectingtheNameandGroupelds.
Navigation
Navigatingtothecursorpositiononthechartusingtouch
ThisonlyappliestoHybridTouchdisplays.
Fromthechartapplication:
1.Selectandholdontherequiredlocationonscreen.
Thechartcontextmenuisdisplayed.
2.SelectGotoCursor.
Navigatingtothecursorpositiononthechart
D
117 64-2
Fromthechartapplication:
1.Positionthecursoratthedesireddestinationonthechart.
2.SelectMenu.
3.SelectNavigate.
4.SelectGotoCursor.
Navigatingtoawaypointonthescreen
D
117 53-2
Fromthechartorradarapplication:
1.Selectthewaypoint.
Thewaypointcontextmenuisdisplayed.
2.SelecttheGotoWaypoint.
Note:WithanactivewaypointselectedyoucanselectStop
Gotooptionfromthewaypointcontextmenuatanytimeto
canceltheaction.
Navigatingtoawaypointinthewaypointslist
Fromanyapplication:
1.PresstheWPTbutton.
Thewaypointmenuisdisplayed.
2.SelectViewWaypointList.
Thewaypointslistisdisplayed.
3.Selecttherequiredwaypoint.
Thewaypointoptionsdialogisdisplayed.
4.SelectGotoWaypoint.
Note:PressingtheWPTbuttonfromthehomescreenwilldisplay
thewaypointslist.
Cancellingnavigationtoawaypoint
Fromthechartorradarapplication:
Usingwaypoints,routesandtracks
85