This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used
in accordance with the Installation Manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at the user’s own
expense.
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numerique de la classe A respecte toutes les exigences du Reglemente sure le
materiel brouilleur du Canada.
© 1998, 1999 Recognition Systems, Inc. – ALL RIGHTS RESERVED
Document Part Number: 70100-6001 – Revision 2.0 i – November, 1999
HandKey and HandNet are trademarks of Recognition Systems, Inc.
Windows is a trademark of Microsoft Corporation.
The trademarks used in this Manual are the property of the trademark holders. The use of these
trademarks in this Manual should not be regarded as infringing upon or affecting the validity of
any of these trademarks.
Recognition Systems, Inc. reserves the right to change, without notice, product offerings or
specifications.
No part of this publication may be reproduced in any form without the express written permission
from Recognition Systems, Inc.
To Next Page
Loading...
