HandKey II Installation and Operation Manual
Revision 2.0 Page 89
Set Time and Date
Time is kept using a 24-hour clock. The time is set in the following format.
Hour: two digits – 00 to 23
Minute: two digits – 00 to 59
The date is set in the following format.
Month: two digits – January = 01, incrementing to December = 12
Day: two digits – 01 through 31
Year: two digits – enter the last two digits of the current year (i.e. 2001 = 01)
The following instructions demonstrate how to set the time and date to October 9,
2001 at 2:45 P.M.
1. When you enter the Set Time & Date command the display appears as follows.
2. Press to exit the command menu.
– or –
3. Press to keep the current time and date, and skip to the Set Address command.
– or –
4. Press to Set the Time and Date. The current month appears on the display.
5. Press to set the month to October. The current day now appears on the
display.
6. Press to set the day to the 9
th
. The current year now appears on the
display.
SET TIME & DATE
*NO YES#
5
*
#
MONTH MM?
1 0 #
DAY DD?
0 9 #
To Next Page
Loading...
