Recognition Systems HandKey II - Enter a Command Menu; If no One Is Enrolled in the Hand Reader; If Users Are Enrolled in the Hand Reader

HandKey II Installation and Operation Manual
Revision 2.0 Page 41
Enter a Command Menu
Press the and keys simultaneously to enter a command menu.
If No One is Enrolled in the Hand Reader
1. The display appears as follows.
2. Press the default password for the menu you wish to enter.
Press for the Service Menu.
Press for the Setup Menu.
Press for the Management Menu.
Press for the Enrollment Menu.
Press for the Security Menu.
3. Press and the first command option in the selected menu appears.
If Users are Enrolled in the Hand Reader
1. The display appears as follows.
2. Enter your ID number on the keypad and place your hand on the platen for verifi-
cation.
3. If verification is successful, the display appears as follows.
CLEAR ENTER
ENTER PASSWORD
1
2
3
4
5
ENTER
READY
*:
ENTER PASSWORD