HandKey II Installation and Operation Manual
Page 60 Revision 2.0
Set Unlock Time Zone
1. When you enter the Set Unlock Time Zone command the display appears as
follows.
2. Press to exit to the Set TZ Table command.
– or –
3. Press to return to the Edit Time Zone command at the beginning of this
command menu.
– or –
4. Press to set an unlock time zone. The display appears as follows.
5. Press to exit without changing the unlock time zone.
6. Enter the new time zone to be applied. For example, press to set time zone
42 as the unlock time zone. The display returns to the Edit Time Zone command at
the beginning of this command menu.
SET UNLOCK TZ
*NO YES#
5
*
#
UNLOCK TZ IS ##
NEW TZ?:
#
4 2
To Next Page
Loading...
