Recognition Systems HandKey II - Page 45

HandKey II Installation and Operation Manual
Revision 2.0 Page 45
7. Enter the user’s ID #. Press . The display shows the current
authority level for this user.
8. Enter the new authority level. Press . The display appears as follows.
9. To enter a new authority level for another user, return to Step 6 but enter the next
user’s ID #.
– or –
10. Press to step to the Set User Reject Level command.
– or –
11. Press to exit command mode.
3 2
1
#
AUTH(0) ?:
4 #
ID# ?
#
5