Recognition Systems HandKey II - Page 53

HandKey II Installation and Operation Manual
Revision 2.0 Page 53
12. To enter time zone information for split 2, return to Step 6.
– or –
13. To enter time zone information for another split, press until the desired split
number appears on the display, then return to Step 6.
– or –
14. To edit a different time zone, press until the enter time zone request (shown
below) appears on the display. Return to Step 4.
– or –
15. To exit the Set Time Zone command, press until the enter time zone request
(shown below) appears on the display. Press .
*
*
*
#
TIME ZONE #?: