Recognition Systems HandKey II - Page 64

HandKey II Installation and Operation Manual
Page 64 Revision 2.0
8. Press the desired digits followed by to set the new Enrollment Mode
password. The display appears as follows.
9. Press to keep the existing password and skip to the next password entry.
– or –
10. Press the desired digits followed by to set the new Management Mode
password. The display appears as follows.
11. Press to keep the existing password and skip to the next password entry.
– or –
12. Press the desired digits followed by to set the new Setup Mode password. The
display appears as follows.
13. Press to keep the existing password and skip to Step 14.
– or –
14. Press the desired digits followed by to set the new Setup Mode password.
15. The display appears as follows.
16. Press to exit command mode.
– or –
17. Press to step to the Clear Memory command.
#
MNGMNT. MODE PW
?
#
#
SETUP MODE PW
?
#
#
SERVICE MODE PW
?
#
#
SET PASSWORDS
*NO YES#
5
*