Recognition Systems HandKey II - Page 75

HandKey II Installation and Operation Manual
Revision 2.0 Page 75
8. To remove more users from the system repeat this procedure beginning at Step 3.
– or –
9. Press (with no ID number) to exit the Remove ID # command. The Remove
User command appears on the display.
10. Press to exit command mode.
– or –
11. Press to return to the Remove User command. Repeat this procedure
beginning at Step 4.
– or –
12. Press to return to the Add User command at the beginning of this command
menu.
REMOVE ID #
:
#
REMOVE USER
*NO YES#
5
#
*