26 January, 2001 SERVICE PROGRAM MODE
5-35
Service
Tables
SP5 Mode Number Function and [Setting]
5907* Plug & Play Sets the brand name and the production name for
Windows Plug & Play. This information is stored
in NVRAM. If the NVRAM is defective or has
been replaced, these names should be registered
again.
To set the plug and play model name, enter the
model number, and then press
'
.
5914* Application Counter
Display
Selects whether or not the total printer counter is
displayed in the UP mode.
0: Off, 1: On
5915
Mechanical Counter
Detection
Checks whether the mechanical counter inside
the inner cover is connected or not.
Display:
0: Not detected
1: Detected
2: Unknown
5918* A3/DLT Counter Display Sets the key press display for the counter key.
[0, 1 / 1 / --]
This setting has no relation to (SSP) SP5-104
A3/DLT Double Count.
5923* Flame Elimination Area
Change
Toggles between two settings that affect the
appearance of the pages for border removal and
printed facing pages: (1) Using the original area
as the allotted area, or (2) Using only the copy
paper as the allotted area.
[0, 1/ 0 / --]
0: Original area used as base
1: Copy used as the base
5958 Feed Clutch Start Timing
Adjustment
Adjusts the clutch timing to optimize the intervals
between fed sheets to reduce jams in the feed
unit.
[35 ~ 57.5 / 42.5 / 2.5mm]
5961* Large Capacity Exit Mode Selects whether or not all stapled copies are sent
to Shift Tray 1 when the Two-Tray finisher is
installed.
[0, 1 / 1 / ---]
1: Enabled
2: Disabled
5970* Debug Serial Output
DFU
5974*
Cherry Server lite/ Switch
to Full
Switches writing between the Cherry lite
application provided and the optional full version.
0: Lite, 1: Full
5990 SMC Printout
1 All (Data List)
2 SP (Mode Data List)
3 User Program
4 Logging Data
5 Diagnosis Report
7NIB Summary
21 Copier User Program
22 Scanner SP
23 Scanner User Program
Prints all of the system parameter lists for the
item selected. (☛ 5.1.6) Input the number for the
item that you want to print, and then press #:
“Execute” on the touch panel.
To Next Page
Loading...
