Ricoh A-C2 - Page 51

1000-SHEET FINISHER INSTALLATION 26 January, 2001
1-34
2. Fasten [A] (! x2) loosely.
3. Hang the front stand [B] and rear stand [C] on the screws installed in step 2.
4. To secure the front and rear stands tighten [A] (! x2) and secure the stands (!
x4).
5. At the front, use handle [D] to pull out the stapler unit.
6. Remove the locking lever [E] (! x1).
7. Align the finisher on the stands, and lock it in place by pushing the locking
lever.
8. Secure the locking lever (! x1) and push the stapler unit into the finisher.
A681I705.WMF
A681I704.WMF
[A]
[B]
[C]
[D]
[E]