Ricoh A-P4 - Fusing;Exit Motor

2. Remove the main cooling fan [A] ( x 2)
3. Timing belt [B] x 1
4. Bracket [C] ( x 3)
5. Main motor [D] ( x 2, x 3)
Fusing/Exit Motor
1. Remove:
• Rear upper cover (See 'Covers and Common Units – Rear Covers')
• Fusing unit cover (See 'Fusing Unit – Hot Roller Strippers'.) (Do not disconnect.)
• Paper output tray
3. Replacement and Adjustment
132
3