Ricoh A-P4 - Printer Controller Service Mode; Controller Service Mode Menus; Bit Switch Programming

1.Service Controller service settings.
2.Engine Engine service settings.
3.End Leave the SP mode and return to normal operation.
1. With the item that you want to open displayed in the LCD, press[#Enter].
2. Press  or  to display all the menus on the same level, then press [#Enter] to open the
submenus.
3. Push [Escape] to the highest level, or push  or  to display “3.End” then press [#Enter].
Printer Controller Service Mode
Controller Service Mode Menus
The controller service mode menu (1.Service) is the first item on the menu.
Item What It Does
Bit Switch Adjusts the bit switch settings.
Clear Setting Initializes the settings for the “System” menu of the user mode.
Print Summary Prints a summary of all the controller settings.
Display Version Displays the current version number of the controller firmware.
Bit Switch Programming
1. Enter the SP mode, select “1.Service”, and press [#Enter] twice
SP1001-001
Bit Switch 1 Set
2. Press  or  to select the bit switch setting to change.
SP1001-002
Bit Switch 2 Set
3. Press [#Enter].
Sw#2 00000000
5. Service Tables
182
5