Ricoh A-P4 - Paper Feed; Pick-Up, Separation, and Feed Rollers

Transfer Belt Cleaning Blade and Toner Overflow Sensor
Transfer Belt Cleaning Blade
1. Transfer belt unit. (See ‘Transfer Belt Unit’.)
2. Transfer belt. (See ‘Transfer Belt’.)
3. Transfer belt cleaning blade [A] ( x3)
• Avoid touching the edge of the new blade. Check the new blade for dust or damage.
Toner Overflow Sensor
1. Transfer belt unit. (See ‘Transfer Belt Unit’.)
2. Transfer belt. (See ‘Transfer Belt’.)
3. Transfer belt cleaning blade [A] ( x3); see the illustration above
4. Turn over the transfer unit and empty the used toner in the transfer unit.
5. Toner overflow sensor [B] ( x1, x3)
• Re-install the color-coded wires in the correct order. R: Red, Br: Brown, Bl: Blue
Transfer Unit
97
3